Ceiling Fan Questions and Answers
A resource for definative answers regarding questions about ceiling fans...

July 2024
« Jul    
Noisy Squeeky Ceiling Fans
Filed under: General, Ceiling Fan Motors
Posted by: @ 11:36 pm

Question: My ceiling fan squeeks and I have a hard time sleeping at night when it is on. Can I oil it or something?

There are several reasons why a ceiling fan will squeek or make noise. Most often, the reason is simply poor quality components. You will find this problem very common with cheaper fans that are sold at the home centers. Particularly the hugger style fans. Often times these noises can be heard from the first day the fan is installed. If all screws are tight and the junction box in the ceiling is well supported and snug, then you are the victim of a poor quality fan and the only remedy may be to see if the place where you purchased the fan will take it back if you are dissatisfied.

However, if your fan has operated for years without making noise, oiling your fan is not a solution, with the exception of the Hunter Original cast iron ceiling fans which are the only fans that require oil…or can be oiled for that matter. What you probably need to do is tighten some screws. I would start from top to bottom on the fan and make sure everything is tight. At the top, make sure the screws that hold the fan to the junction box are tight. You will need to remove the canopy that is mounted at the ceiling in order to check these screws. Next, when replacing the canopy, make sure those screws are tight. Next, check the screws that hold the blade holders to the fan motor, then the screws that hold the blades to the blade holders. This is the most common place screws get loose.

Once all of the screws are tightened, turn the fan on again and see if it still makes the annoying sound. If not, then you have solved your problem. If it still makes noise, maybe the problem is that your fan is out of balance. If your fan is wobbling, you will need to balance the blades. Check the link at the bottom of this posting for a video with instructions for balancing your fan.

If your fan is not wobbling, or you went through the process of balancing your fan and it is still making noise, then the bearings in your fan motor are probably wearing out and there is nothing you can do. All ceiling fans come with sealed bearings (except for the Hunter Original fans), therefore, oil is not a solution as some people have suggested. The cheaper fans have motors that will go out, so your best bet at this point is to replace the fan. I would suggest looking for a fan that has a superior motor next time you make your purchase. Not only will they run quieter, they will move more air and last a lifetime. The best motors can be left running 24 hours a day for years and never make a peep while keeping you 2 or 3 times cooler than cheaper fans. The best motors found in Casablanca fans that have the Casablanca XLP 2000 motor and Emerson fans that have the Emerson K55 motor. These motors are not in all of their fans, only in their upper end models. Use the link below for top quality fans to see examples.

Balancing a Ceiling Fan: http://www.hansenwholesale.com/ceilingfans/ceilingfaninstallation.asp?Step=10&emt=leftnav

Top Quality Ceiling Fans: http://www.hansenwholesale.com/ceilingfans/fansearch.asp?sbPower=5

Ceiling Fan FAQs: http://www.hansenwholesale.com/ceilingfans/fanfaqs.asp?emt=leftnav

comments (0)
How do ceiling fans operate?
Filed under: General, Ceiling Fan Motors
Posted by: @ 1:48 pm

Question: How do ceiling fans operate? (in 200 words or less please)


This post was awarded #1 Answer at Yahoo! Answers.

There are 2 types of ceiling fans: Those with spinner motors and those with induction motors. Spinner motors have a center shaft that the entire motor revolves around. In this case, the blades are attached directly to the motor itself (by blade holders). Induction motors work in the opposite manner in that the motor is stationary and the shaft in the center spins. A rubberized noise-dampening self-balancing flywheel is attached to the center shaft, which the blade holders are then attached to. The latter is the best as the induction motor is more powerful and has more torque. The air movement is directly associated with the pitch and aerodynamic design of the blades as well as the RPM the blades reach. The steeper the pitch, the more torque is required to drive the blades through the air.

The only companies that make fans with induction motors are Emerson (since 1895) who manufactures the K55 motor, Casablanca (XLP motor) and Fanimation (who uses the Emerson K55 motor). Although Fanimation uses the K55 motor in their fans, their wafty palm leaf blades are wide and bulky and not aerodynamically designed, so they don’t move much air.

Casablanca used Emerson motors for over 20 years before they started manufacturing their own motor. Most other fan manufacturers use spinner motors. Spinner motors are measured in millimeters and the best spinner motors are at least 188mm in size, which will do a pretty decent job. Smaller spinner motors such as 172mm or 153mm will move substantially less air and are common in fans sold at home centers.

comments (0)